inflatable seal

T Valve

The Type T Valve is designed for heavy-duty service. It is typically used for slurries, abrasives, and heavy density materials. The T valve is available in 316 stainless steel, Cast Iron, Aluminum as standard and can be fabricated from any weldable alloy with the full range of sanitary finishes. Options include high temperature or pressure (3 bar) designs. T valves are commonly used for charging and discharging hoppers, tanks, silos, conveying systems, and weighing systems. t valve

 Standard Dimensions for reference only   
A D E F H L N P R W Bolt Circle Dia. B
Gemco		 B#
150 ANSI
Port Opening Back Opening Height Outside Diameter Disk Clearance Manual Lever Envelope Actuator Envelope Disk Clearance No. Of Holes Bolt Hole Dia. No. Of holes Bolt Hole Dia.
4 8 4-3/4 13-1/2 1-1/8 13-1/4 8-7/8 13-3/4 9-1/4 1/4 11-3/4 4 1/2 8 7/8
6 10 5-7/8 16 1-5/8 19 11-7/8 19-1/8 11-1/2 11/16 14-1/4 6 5/8 12 1
8 12-3/4 6-1/2 19 2-13/16 19 13-1/4 20-1/2 11-1/2 1-1/8 17 6 5/8 12 1
10 141/8 7 21 3-13/16 19 13-7/8 21-1/8 1-1/2 1-9/16 18-3/4 6 5/8 12 1-1/8
12 20 10-7/16 27-1/2 4-1/2 36 18-1/4 253/16 12-13/16 1-5/8 25 8 5/8 20 1-1/4
14 22 10-7/8 29-1/2 5 36 19-3/4 26 12-13/16 1-3/4 27-1/4 8 3/4 20 1-3/8
16 25 13-7/16 32 4-5/16 36 21 28-1/2 17-1/2 2-3/4 29-1/2 10 7/8 20 1-3/8
20 31 16-3/4 38-3/4 5½ — — 26-11/16 18-15/32 3-5/16 36 — — 28 1-3/8

 VALVE WEIGHTS for reference only  
Size Manually Operated Air Actuator Controls
  lbs kgs lbs kgs lbs kgs
3"
40
18
20
9
10
5
4"
60
27
20
9
10
5
6"
115
52
30
14
10
5
8"
170
77
30
14
10
5
10"
240
109
30
14
10
5
12"
265
120
50
23
10
5
14"
460
209
50
23
10
5
16"
650
295
50
23
10
5
20"
800
364
90
41
10
5
24"
950
432
90
41
10
5

*All weights are approximate for stainless steel valves